Ipv6

The last week I’ve been working on bringing Snort_inline to the Snort 2.8.0.1 level, including it’s IPv6 support. I’m almost ready to commit it to SVN, there are just some issues I need to fix in the inline specific code. The code will get rid of libdnet and use libnet 1.1 for sending reset/reject packets for both IPv4 and IPv6. After committing I will start working on getting the IPv6 features I wrote for NitroSecurity into this tree. This includes more matches, tunnel decoding (including for example the freenet6 tunnel, etc). So stay tuned! ...

Libnet is a cool packet crafting tool, used by Snort to send TCP reset packets and ICMP unreachable packets as part of active responses. Libnet 1.1 supports IPv6 which is what I needed for my work. After some reading and testing there were a few problems. First, while possible to send TCP reset packets, the packets didn’t have a correct checksum and debugging this with valgrind showed lots of memory errors. Second, ICMPv6 was only partly implemented. The libnet_build_* functions for it are missing. This is, by the way, quite a common picture. Many libraries and projects have some support for IPv6, but generally incomplete and less well tested. ...

I wrote about my experiments with IPv6 before. These were done for my home network where I have an ISP that offers an IPv6 tunnel broker. The last two months I have not been in my home, but instead using internet ‘on the road’ mostly through wireless LANs. There are a number of techniques for using IPv6 if your provider doesn’t offer it, and today I stumbled on one in this NetworkWorld article, so I decided to give it a try. ...

As I wrote before, I’m experimenting with IPv6. I have a tunnel to my ISP from my router. The router is running Linux and uses radvd to advertise my IPv6 prefix to my networks. My dmz, in which this blog is hosted, get the 2001:888:13c5:cafe::/64 prefix. The IPaddresses are then created by taking the MACaddress of a network interface and placing that behind the prefix. It’s a nice and simple autoconfiguration system. So the IPv6 address of the blog is 2001:888:13c5:cafe:20c:29ff:fe13:2b42. ...

My ISP is one of the few here in the Netherlands that provides a IPv6 tunnel broker. I have played with it some during the last year or so, but now decided to get a little more serious with it. So I’ve decided to enable it for my blog. When opening up my site to IPv6 one thing that is important is security. I will describe the status of IPv6 support of my current setup: ...